Test equipment endoscope leak testers

Zutron Medical ZUTR10003: troubleshooting and error codes

The ServiceForge knowledge base holds 2 documented symptoms for the Zutron Medical ZUTR10003, with 2 ranked causes, 6 diagnostic checks with test points and expected values, and 0 error codes. Each symptom below shows its causes and the first check; the rest is one connection away. Connect ServiceForge to your AI

Symptoms

Calibration: Automatic Leak Tester air pressure output

Daily verification that unit produces correct air pressure within specification range using calibration gauge

Ranked causes

1. Air pressure output outside calibration range (unknown)

First check

Connect calibration gauge to leak tester

Test point: Calibration Gauge (ZUTR10003TG) inlet
Expected: Proper mechanical connection

2 more checks with pass and fail actions, 1 corrective action, and part numbers are in ServiceForge. Connect ServiceForge to your AI

Calibration: Daily air pressure output verification

Daily verification that Automatic Leak Tester produces correct air pressure output for ACMI, Fujifilm, Fuse, Olympus, Pentax, Richard Wolf & Storz endoscopes

Ranked causes

1. Air pressure output out of specification (unknown)

First check

Connect calibration gauge to unit

Test point: Calibration Gauge (ZUTR10003TG)
Expected: Gauge connected

2 more checks with pass and fail actions, 1 corrective action, and part numbers are in ServiceForge. Connect ServiceForge to your AI

Community

0 fixes logged by technicians through their AI, with outcomes, for this model.

ServiceForge knowledge base record. Field-unverified unless technicians confirmed it. A teaching summary of the record, not a service manual. Export 2026-10-14.