Stryker MAKOplasty TKA: troubleshooting and error codes
The ServiceForge knowledge base holds 3 documented symptoms for the Stryker MAKOplasty TKA, with 3 ranked causes, 3 diagnostic checks with test points and expected values, and 0 error codes. Each symptom below shows its causes and the first check; the rest is one connection away. Connect ServiceForge to your AI
Symptoms
MICS Handpiece does not power on
Handpiece fails to power on when too hot from sterilization cycle
Ranked causes
- 1. Handpiece temperature too high after sterilization (common)
Assess handpiece temperature by touch
- Test point
- MICS Handpiece body
- Expected
- Cool enough for staff to handle easily
1 corrective action and part numbers are in ServiceForge. Connect ServiceForge to your AI
MICS Handpiece does not power on after sterilization patient safety
Handpiece fails to power on immediately after sterilization cycle; powers on after cooling period
Ranked causes
- 1. Handpiece temperature exceeds safe operating threshold post-sterilization (common)
Verify handpiece temperature is below safe handling threshold
- Test point
- Handpiece exterior surface
- Expected
- Cool enough for staff to handle easily
1 corrective action and part numbers are in ServiceForge. Connect ServiceForge to your AI
MICS Handpiece does not power on when hot caution
Handpiece fails to power on after sterilization or thermal processing; device requires cooling before operation
Ranked causes
- 1. Handpiece temperature exceeds safe operating threshold (common)
Verify handpiece is cool enough to handle safely
- Test point
- Handpiece exterior
- Expected
- Cool to touch; staff can easily handle
1 corrective action and part numbers are in ServiceForge. Connect ServiceForge to your AI
Community
0 fixes logged by technicians through their AI, with outcomes, for this model.
ServiceForge knowledge base record. Field-unverified unless technicians confirmed it. A teaching summary of the record, not a service manual. Export 2026-10-14.